SMC Networks SMC6824M manual 109, Configuring an IP based ACL

ACCESS CONTROL LISTS

•Source/Destination Subnet Mask – Subnet mask for source or destination address. (See the description for SubMask on page 3-100.)

•Protocol Bitmask – Check the protocol field.

•Service Type Mask – Check the rule for the specified priority type. (Options: Precedence, TOS, DSCP; Default: TOS)

•Source/Destination Port Bitmask – Protocol port of rule must match this bitmask. (Range: 0-65535)

•Control Code Bitmask – Control flags of rule must match this bitmask. (Range: 0-63)

Web – Configure the mask to match the required rules in the IP ingress or egress ACLs. Set the mask to check for any source or destination address, a specific host address, or an address range. Include other criteria to search for in the rules, such as a protocol type or one of the service types. Or use a bitmask to search for specific protocol port(s) or TCP control code(s).

Then click Add.

Figure 3-47 Configuring an IP based ACL

3-109