SMC Networks SMC6824M manual Configuring the Telnet Interface

CONFIGURING THE SWITCH

Web – Click System, Line, Telnet. Specify the connection parameters for Telnet access, then click Apply.

Figure 3-14 Configuring the Telnet Interface

CLI – Enter Line Configuration mode for a virtual terminal, then specify the connection parameters as required. To display the current virtual terminal settings, use the show line command from the Normal Exec level.

Console(config)#line vty		4-14
Console(config-line)#login local		4-15
Console(config-line)#password 0 secret		4-16
Console(config-line)#timeout login response 300		4-17
Console(config-line)#exec-timeout 0		4-18
Console(config-line)#password-thresh 3		4-19
Console(config-line)#end
Console#show line		4-24
Console configuration:	5 times
Password threshold:
Interactive timeout: Disabled
Login timeout: Disabled
Silent time:	60
Baudrate:	auto
Databits:	8
Parity:	none
Stopbits:	1
VTY configuration:	3 times
Password threshold:
Interactive timeout:	600 sec

Login timeout: 300 sec

Console#

3-34