SMC Networks SMC6824M manual 252, Syntax Show garp timer interface, Shows all Garp timers

GVRP AND BRIDGE EXTENSION COMMANDS

unless you are experiencing difficulties with GMRP or GVRP registration/deregistration.

•Timer values are applied to GVRP for all the ports on all VLANs.

•Timer values must meet the following restrictions:

-leave >= (2 x join)

-leaveall > leave

Note: Set GVRP timers on all Layer 2 devices connected in the same network to the same values. Otherwise, GVRP may not operate successfully.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#garp timer join 100

Console(config-if)#

Related Commands

show garp timer (4-252)

show garp timer

This command shows the GARP timers for the selected interface.

Syntax

show garp timer [interface]

interface

•ethernet unit/port

-unit - Stack unit. (Range: 1-8)

-port - Port number. (Range: 1-26)

•port-channel channel-id(Range: 1-6)

Default Setting

Shows all GARP timers.

Command Mode

Normal Exec, Privileged Exec

4-252