SMC Networks SMC6824M manual Exec Commands, Command Modes, Class Mode

COMMAND LINE INTERFACE

mode. You can always enter a question mark “?” at the prompt to display a list of the commands available for the current mode. The command classes and associated modes are displayed in the following table:

Table 4-1 Command Modes

Class	Mode
Exec	Normal
	Privileged
Configuration	Global*	Access Control List
		Interface
		Line
		VLAN Database

*You must be in Privileged Exec mode to access the Global configuration mode.

You must be in Global Configuration mode to access any of the other configuration modes.

Exec Commands

When you open a new console session on the switch with the user name and password “guest,” the system enters the Normal Exec command mode (or guest mode), displaying the “Console>” command prompt. Only a limited number of the commands are available in this mode. You can access all commands only from the Privileged Exec command mode (or administrator mode). To access Privilege Exec mode, open a new console session with the user name and password “admin.” The system will now display the “Console#” command prompt. You can also enter Privileged Exec mode from within Normal Exec mode, by entering the enable command, followed by the privileged level password “super” (page 4-25).

To enter Privileged Exec mode, enter the following commands and passwords:

Username: admin

Password: [system login password]

CLI session with the SMC6824M is opened.

To end the CLI session, enter [Exit].

Console#

4-7