SMC Networks SMC6824M manual Secure Shell Commands, Command Function Mode

COMMAND LINE INTERFACE

Table 4-15 Secure Shell Commands

Command	Function	Mode	Page
ip ssh server	Enables the SSH server on the switch	GC	4-47
ip ssh timeout	Specifies the authentication timeout for the SSH	GC	4-48
	server
ip ssh	Specifies the number of retries allowed by a	GC	4-49
authentication-	client
retries
ip ssh server-key	Sets the SSH server key size	GC	4-50
size
copy tftp	Copies the user’s public key from a TFTP server	PE	4-82
public-key	to the switch
delete public-key	Deletes the public key for the specified user	PE	4-50
ip ssh crypto	Generates the host key	PE	4-51
host-key generate
ip ssh crypto	Clear the host key from RAM	PE	4-52
zeroize
ip ssh save	Saves the host key from RAM to flash memory	PE	4-52
host-key
disconnect	Terminates a line connection	PE	4-23
show ip ssh	Displays the status of the SSH server and the	PE	4-53
	configured values for authentication timeout and
	retries
show ssh	Displays the status of current SSH sessions	PE	4-53
show public-key	Shows the public key for the specified user or for	PE	4-55
	the host
show users	Shows SSH users, including privilege level and	PE	4-80
	public key type

The SSH server on this switch supports both password and public key authentication. If password authentication is specified by the SSH client, then the password can be authenticated either locally or via a RADIUS or TACACS+ remote authentication server, as specified by the authentication login command on page 4-98.If public key authentication is specified by the client, then you must configure authentication keys on both the client and the

4-45