SMC Networks SMC6824M manual Logging host, Logging facility, Syntax No logging host hostipaddress

COMMAND LINE INTERFACE

logging host

This command adds a syslog server host IP address that will receive logging messages. Use the no form to remove a syslog server host.

Syntax

[no] logging host host_ip_address

host_ip_address - The IP address of a syslog server.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•By using this command more than once you can build up a list of host IP addresses.

•The maximum number of host IP addresses allowed is five.

Example

Console(config)#logging host 10.1.0.3

Console(config)#

logging facility

This command sets the facility type for remote logging of syslog messages. Use the no form to return the type to the default.

Syntax

[no] logging facility type

type - A number that indicates the facility used by the syslog server to dispatch log messages to an appropriate service. (Range: 16-23)

Default Setting

23

Command Mode

Global Configuration

4-59