SMC Networks SMC6824M manual Command Attributes

SIMPLE NETWORK MANAGEMENT PROTOCOL

Command Attributes

•User Name – The name of user connecting to the SNMP agent. (Range: 1-32 characters)

•Group Name – The name of the SNMP group to which the user is assigned. (Range: 1-32 characters)

•Engine ID – The engine identifier for the SNMP agent on the remote device where the remote user resides. Note that the remote engine identifier must be specified before you configure a remote user. (See “Specifying a Remote Engine ID” on page 3-54.)

•Remote IP – The Internet address of the remote device where the user resides.

•Security Model – The user security model; SNMP v1, v2c or v3. (Default: v1)

•Security Level – The security level used for the user:

-noAuthNoPriv – There is no authentication or encryption used in SNMP communications. (This is the default for SNMPv3.)

-AuthNoPriv – SNMP communications use authentication, but the data is not encrypted (only available for the SNMPv3 security model).

-AuthPriv – SNMP communications use both authentication and encryption (only available for the SNMPv3 security model).

•Authentication Protocol – The method used for user authentication. (Options: MD5, SHA; Default: MD5)

•Authentication Password – A minimum of eight plain text characters is required.

•Privacy Protocol – The encryption algorithm use for data privacy; only 56-bit DES is currently available.

•Privacy Password – A minimum of eight plain text characters is required.

3-59