SMC Networks SMC6824M manual 226, Displaying Port Members of Multicast Services

CONFIGURING THE SWITCH

• Port or Trunk – Specifies the interface attached to a multicast router.

Web – Click IGMP Snooping, Static Multicast Router Port Configuration. Specify the interfaces attached to a multicast router, indicate the VLAN which will forward all the corresponding multicast traffic, and then click Add. After you have finished adding interfaces to the list, click Apply.

Figure 3-102 Statically Configuring a VLAN to

Forward Multicast Traffic

CLI – This example configures port 11 as a multicast router port within VLAN 1.

Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11 4-278Console(config)#exit

Console#show ip igmp snooping mrouter vlan 14-279VLAN M'cast Router Port Type

---------------------- -------

1Eth 1/11 Static

Console(config)#

Displaying Port Members of Multicast Services

You can display the port members associated with a specified VLAN and multicast IP address.

Command Attribute

•VLAN ID – Selects the VLAN in which to display port members.

•Multicast IP Address – The IP address for a specific multicast service

3-226