HP 5000 Service Tests and Utilities, Present after replacing a component, remember to Reinstall

	Service Tests and Utilities
	Only replace one component at a time and check if the error has
WARNING
	gone before replacing another component. If the error is still
	present after replacing a component, remember to REINSTALL

the component that was first removed before replacing another component.

Self Diagnostics - Initialization Sequence

LED’s	Front Panel Message	Printer Error - Error	Corrective Action
		Message/Code
Max. Quality		The Printer hangs and	Install the BootROM or replace it if already
		nothing else happens	installed ⇒ Page 8-75.
Productivity
	Self Test	Error Memory	If X = 7 reseat the DRAM DIMM’s,
Max. Speed	Please Wait	Config:X	otherwise
		(sometimes only the	replace the DRAM DIMM’s ⇒	Page 8-75.
		error code is
		displayed)
Max. Quality		Error Memory Test	Replace the DRAM DIMM’s ⇒	Page 8-75.
Productivity
Max. Speed
Max. Quality	End Self Test
Productivity
Max. Speed
Max. Quality	Initializing	Power Supply Error	The Trailing Cable is not connected
		#1	correctly. Reconnect the Trailing Cable ⇒
Productivity		Contact HP	Page 8-36.
		Representative
Max. Speed
	Initializing IO devs	BootROM checksum	Replace the BootROM ⇒ Page 8-75.
		failed

HP DesignJet 5000 Series Printers Service Manual 4-3