HP manual E50000

System Error Codes

System Error:	e50000
Problem	This is an error that is related to the Hard Disk Drive, either the connections
Description:	are bad or that the Hard Disk Drive or the Main PCA are defective.

Corrective Action: Try the following:

νUnplug the Printer, remove the HDD cover and check that the two cables (a flat one and the power cable) are connected. Also

check that the flat cable connector is clipped in correctly. If the problem persists, replace the Hard Disk Drive ⇒ Page 8-72.

νIf the problem continues, check that the Green and Orange LED’s

on the Main PCA are ON. If they are not ON, probably the PWS or its connections are defective. If the two LED’s are ON and the error continues, replace the Main PCA ⇒ Page 8-79.

2-24 HP DesignJet 5000 Series Printers Service Manual