HP 5000 manual Trailing Cable, Refer to the table on Page 8-4for information on screw types

Removal and Installation

Trailing Cable

Removal

WARNING	Switch off the Printer and remove the Power Cord.
	Refer to the table on Page 8-4for information on screw types.
NOTE
	1.	Remove the Top Cover - Refer to
		Page 8-5.
	2.	Remove the Right Rear Cover - Refer
		to Page 8-16.
	3.	Remove the Right Hand Cover - Refer
		to Page 8-10.
	4.	Remove the Left Hand Cover - Refer
		to Page 8-6.
	5.	Slide the Carriage to the left side of
		the Printer.

6. Unclip and remove the Carriage Cover to access the Trailing Cable in the Carriage.

8-36 HP DesignJet 5000 Series Printers Service Manual