HP 5000 manual Diagnostic Print, For Firmware Version A.02.xx, the Printer does not print

Service Tests and Utilities

Diagnostic Print

This Service Utility allows you to print a Diagnostic print that will help you to troubleshoot image quality problems and verify printhead nozzle status.

1.In the Service Utilities submenu, scroll to "1.8 Diagnostic Print" and press Enter.

1.Service Utilities

1.3Altitude Setup

1.4EEROM Setup

1.5Reset Life Counters

1.6Backup EEROM

1.7Img. Quality Warning

1.8Diagnostic Print

Top
Back
↑	Make Selection
↓
		Press Enter
Enter

NOTE		For Firmware Versions earlier than A.02.xx, the Printer will
		start to print the Diagnostic Print immediately after selecting.
		For Firmware Version A.02.xx, the Printer DOES NOT print the
NOTE
		complete Diagnostic Print. Instead you must select which part of
		the Diagnostic Print that you need.
	2 Use the Arrow keys to select the page that you need and press
		Enter to print it.

1.8 Diagnostic Print

Page 1

Page 2

Page 3

Page 4

Page 5

Top
Back
↑	Make Selection
↓
		Press Enter
Enter

νPage 1 - Checks for banding in the Primary Colors.

νPage 2 - Checks the Color to Color Alignment.

νPage 3 - Check the Bidirectional Alignment.

νPage 4 - Check for Vertical Line Straightness.

νPage 5 - Performs the Nozzle Test.

For information on how to use the Diagnostic Print, refer to “How to Use the Diagnostic Print” on page 6-4.

4-34 HP DesignJet 5000 Series Printers Service Manual