HP 5000 manual Status Messages, Insert

HP Ink Supplies Troubleshooting

Status Messages

These messages provide only an action message for the user to perform. For information on accessing detailed information on consumables refer to 3-7, Obtaining Ink Cartridge Information and 3-8, Obtaining Printhead Information .

Status	Description	Procedure
OK	The ink system is working correctly	None
Insert	There is no consumable installed	Insert the correct consumable.
		If the correct consumable is
		inserted, check the Carriage Tube
		Connector is correctly connected to
		the Carriage.
Setup	The setup message is displayed	When the setting up of the tube
	when new tubes have been installed	system is complete, the front panel
	into the Printer and you have	will display a message
	installed the correct setup	(XX04)Replace asking you to
	Printheads.	remove them and replace them
		with ‘normal Printheads’.
Low	Ink Cartridge Level has reached it’s	New supplies should be obtained
	low limit (100 ml.). This is an early	ready to replace the particular color
	warning.
Very	Ink Cartridge Level has reached it’s	Overnight printing should not be
Low	very low limit (50 ml.)	attempted.
		Priming of the Ink Tubes should
		not be attempted.
		A new Ink Cartridge is strongly
		recommended to prevent the
		Printer from interrupting a print.
Empty	Ink Cartridge is empty. The Printer	A new Ink Cartridge is required.
	stops.	Check image quality of prints in
		progress.

HP DesignJet 5000 Series Printers Service Manual 3-11