HP 5000 manual Service Utilities

Service Tests and Utilities

Service Utilities

The following is a list of all internal Service Utilities available in the Printers. Instructions for entering the Service Utilities menu are given on Page 4-15.

1. Turn DRIVE ROLLER ⇒ Page 4-18

The purpose of this Service Utility is to facilitate the cleaning of the Drive Roller and the Overdrive.

2. Prime TUBES ⇒ Page 4-19

The purpose of this Service Utility is to prime the Tubes when a new Tubes System has been installed or automatic priming was not completed.

3. Altitude Setup ⇒ Page 4-23

This Service Utility allows the operating altitude to be set for the Printer.

4. EEROM Setup ⇒ Page 4-24

The purpose of this Service Utility is to set the Printer Model, the Serial Number and Japanese Fonts.

5. Reset Life Counters ⇒ Page 4-29

The purpose of this Service Utility is to reset the preventive maintenance counters when parts have been replaced.

6. Backup EEROM ⇒ Page 4-31

The purpose of this Service Utility is to restore the EEROM content when the Main PCA or Hard Disk Drive are replaced.

7. Image Quality Warning ⇒ Page 4-33

This Service Utility allows you to turn the Image Quality Warning message On or Off.

8. Diagnostic Print ⇒ Page 4-34

This Service Utility allows you to print a Diagnostic print that will help you to troubleshoot image quality problems and verify printhead nozzle status.

4-14 HP DesignJet 5000 Series Printers Service Manual