HP 5000 manual Right Hand Trim, P27

Removal and Installation

Right Hand Trim

Removal

WARNING	Switch off the Printer and remove the Power Cord.
	Refer to the table on Page 8-4for information on screw types.
NOTE
	1.	Remove Right Rear Cover - Refer to
		Page 8-16.
	2.	Remove Right Hand Cover - Refer to
		Page 8-10.
	3.	Remove Media Lever Assembly -
		Refer to Page 8-18.
	4.	Disconnect the Sensors cable from
		position P27 on the Main PCA.

P27

5. Remove 1 T-15 screws (Type F) and 1 T-20 (Type L) from the Right Hand Trim.

8-20 HP DesignJet 5000 Series Printers Service Manual