SMC Networks SMC6824M manual Show map access-list ip, Egress Queue Priority Mapping

ACCESS CONTROL LIST COMMANDS

•A packet matching a rule within the specified ACL is mapped to one of the output queues as shown in the following table. For information on mapping the CoS values to output queues, see queue cos-mapon page 4-257.

Table 4-37 Egress Queue Priority Mapping

Queue	0	1	2	3
Priority	1,2	0,3	4,5	6,7

Example

Console(config)#interface ethernet 1/2

Console(config-if)#map access-list ip bill cos 0

Console(config-if)#

Related Commands

queue cos-map(4-257)

show map access-list ip (4-136)

show map access-list ip

This command shows the CoS value mapped to an IP ACL for the current interface. (The CoS value determines the output queue for packets matching an ACL rule.)

Syntax

show map access-list ip [interface]

interface

ethernet unit/port

-unit - Stack unit. (Range: 1-8)

-port - Port number. (Range: 1-26)

Command Mode

Privileged Exec

Example

Console#show map access-list ip

Access-list to COS of Eth 1/4

Access-list ALS1 cos 0

Console#

4-136