SMC Networks SMC6824M manual Telnet Server Commands, Ip telnet server, Ip http secure-server4-41

COMMAND LINE INTERFACE

Command Usage

•You cannot configure the HTTP and HTTPS servers to use the same port.

•If you change the HTTPS port number, clients attempting to connect to the HTTPS server must specify the port number in the URL, in this format: https://device:port_number

Example

Console(config)#ip http secure-port 1000

Console(config)#

Related Commands

ip http secure-server(4-41)

Telnet Server Commands

Table 4-14 Telnet Server Commands

Command	Function	Mode	Page
ip telnet server	Allows the switch to be monitored or configured	GC	4-40
	from Telnet; also specifies the port to be used by
	the Telnet interface

ip telnet server

This command allows this device to be monitored or configured from Telnet. It also specifies the TCP port number used by the Telnet interface. Use the no form without the “port” keyword to disable this function. Use the no from with the “port” keyword to use the default port.

Syntax

ip telnet server [port port-number]no telnet server [port]

•port - The TCP port number used by the Telnet interface.

•port-number- The TCP port to be used by the browser interface. (Range: 1-65535)

4-43