P
OWER

OVER

E

THERNET

C

OMMANDS

4-96

show power mainpower

Use this command to display the current power status for the switch.

Command Mode

Privileged Exec
Example
Table 4-27 show power inline status parameters
Parameter Description
Admin The power mode set on the port (see power inline on
page 4-93)
Oper The current operating power status (displays on or off)
Power (mWatt) The maximum power allocated to this port (see power inline
maximum allocation on page 4-93)
Power (used) The current power consumption on the port in milliwatts
Priority The port’s power priority setting (see power inline priority on
page 4-94)
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 375 watts
System Operation Status : on
Mainpower Consumption : 15 watts
Software Version : Version 0x1B64, Build 0x07
Console#
Table 4-28 show power mainpower parameters
Parameter Description
Maximum Available
Power
The available power budget for the switch (see power
mainpower maximum allocation on page 4-91)
System Operation
Status
The current operating power status (displays on or off)
Mainpower
Consumption
The current power consumption on the switch in watts
Software Version The version of software running on the PoE controller
subsystem in the switch. This software can be updated using
the copy file controller command (see page 4-82).