SMC Networks SMC6824M manual 241, Following example shows how to display information for Vlan

COMMAND LINE INTERFACE

Example

The following example shows how to display information for VLAN 1:

Console#show vlan id 1
Vlan ID:	1
Type:	Static
Name:	DefaultVlan
Status:	Active	Eth1/ 3(S)	Eth1/ 4(S) Eth1/ 5(S)
Ports/Port channel:	Eth1/ 1(S) Eth1/ 2(S)
	Eth1/ 6(S) Eth1/ 7(S)	Eth1/ 8(S)	Eth1/ 9(S) Eth1/10(S)
	Eth1/11(S) Eth1/12(S)	Eth1/13(S)	Eth1/14(S) Eth1/15(S)
	Eth1/16(S) Eth1/17(S)	Eth1/18(S)	Eth1/19(S) Eth1/20(S)
Console#	Eth1/21(S) Eth1/22(S)	Eth1/23(S)	Eth1/24(S) Eth1/26(S)

Configuring Private VLANs

Private VLANs provide port-based security and isolation between ports within the assigned VLAN. This switch supports two types of private VLAN ports: promiscuous, and community ports. A promiscuous port can communicate with all interfaces within a private VLAN. Community ports can only communicate with other ports in their own community VLAN, and with their designated promiscuous ports. This section describes commands used to configure private VLANs.

Table 4-61 Private VLAN Commands

Command	Function	Mode	Page
Edit Private VLAN Groups
private-vlan	Adds or deletes primary and secondary	VC	4-243
	VLANs
private-vlan association	Associates a secondary with a primary	VC	4-243
	VLAN
Configure Private VLAN	Interfaces
switchport mode	Sets an interface to host mode or	IC	4-245
private-vlan	promiscuous mode
switchport private-vlan	Associates an interface with a secondary	IC	4-246
host-association	VLAN
switchport private-vlan	Maps an interface to a primary VLAN	IC	4-246
mapping

4-241