1.Right click on the icon; there are two items for users to operate the utility.
Launch Config Utilties
Click it to enter the utility program of GW-DS300N
Use Zero Configuration as Configuration utility
Click it and the adapter will stop working immediately and GW-DS300N will not be the default utility anymore. If you want to use GW-DS300N as the default utility again, just click “Use PCIConfig as Configuration utility”.
Switch to AP Mode
Click it to change the adapter mode of GW-DS300N into AP mode. If you want to use the adapter function, please click “Switch to Station Mode”.
Exit
Select “Exit” to close the configuration utility tool.
2. The GW-DS300N icon changes from time to time to reflect the current wireless network connection status. The status indicates as follows:
The signal strengh is good..
The signal strength is normal.
The signal strength is weak.
GW-DS300N has not connected to any AP yet.
GW-DS300N is unplugged or it is not in use.
GW-DS300N
