|
|
|
|
| automatically disable/enable protection mode. |
|
| |
3 |
| |
|
| |
|
| |
| Tx Rate | There are several options including Auto/1/2/5.5/11/ |
|
| 6/9/12/18/24/36/48/54Mbps for you to select. When |
|
| “Auto”is selected, the device will choose the most |
|
| suitable transmission rate automatically. The higher |
|
| data rate you designated in the network, the shorter |
|
| distance is allowed between the adapter and the |
|
| wireless stations. |
|
| When the wireless mode is“802.11 B only”, the |
|
| maximum data rate is 11Mbps (11b) so that there are |
|
| only “Auto/1/2/5.5/11Mbps” options you can select. |
Tx Burst
Enable TCP Window Site
Tx Burst enables the adapter to deliver better throughput during a period of time but the function only takes effect when connecting with the AP which also supports Tx Burst.
The TCP Window is the amount of data which a sender can send on a particular connection before it gets an acknowledgment back from the receiver that it has gotten some of it. When the Router or AP which the adapter is connecting to has set up the TCP Window, you can enable the parameter to meet the data size for the Router or AP connection. The larger TCP Window the better performance.
Fast Roaming at ~ When you want to fast roaming to the network nearby
| dBm | without intercepting the wireless connection |
42 |
|
|
|
| |
|
|
