Lucent Technologies GW-DS300N manual WEP Key

WPA-Preshared Key This setting only takes effect under“WPA-PSK”

2or“WPA2-PSK” mode. Besides, the key should be at least 8 characters and 63 characters at maximum. This Passphrase (also called a shared secret) that must be entered in both the wireless access point and the WPA clients (computers). The WPA pre-shared key should be a random sequence of either keyboard characters (upper and lowercase letters, numbers, and punctuation). You have to enter the same Passphrase or Hexadecimal key into both your access points and computers but the length requirement is changed. The more random your WPA pre-shared key, the safer it is to use.

	WEP Key
	Key#1~#4	This setting only takes effect under“Open”or
		“Shared”mode. There are four types of WEP key
		settings, please set the key depending on the real
		environment. According to the type and length, there
		are four WEP Key types:
		Hexadecimal–Only“A~F,”“a~f,”and“0~9”are
		allowed to be set in a WEP key.
		ASCII–Numerical values, characters or signs are all
		allowed to be arranged into a WEP key. It is more
		recognizable for user.
		64-bit–Enter 10-digit Hex values or 5-digit ASCII
		values as the encryption keys. For example:“
		0123456aef”or“Guest.”
		128-bit–Enter 26-digit Hex values or 13-digit ASCII
		values as the encryption keys. For example:“012345
		67890123456789abcdef”or“administrator.”
30
	GW-DS300N