| can select a channel for | 2 |
| this mode, the PSM mode will NOT take effect and | |
|
| |
| the Preamble function will be enabled. |
|
TX Power | Choose the TX (transmission) Power according to |
|
| the real environment. If you want to lower the |
|
| transmit power of the adapter for saving the |
|
| power of the system, you can select the lower |
|
| percentages from the list. The lower power |
|
| will cause the lower signal strength and the |
|
| coverage range. The default setting is “Auto”. |
|
Preamble | The preamble defines the length of the CRC (cyclic |
|
| redundancy check) block when communicating |
|
| among the wireless networks. There are two types |
|
| of preamble: Auto and Long Preamble. Intensive |
|
| network traffic areas should use the short preamble |
|
| type. |
|
RTS Threshold | Here it defines the minimum packet size required for |
|
| RTS (Request to Send). Select a value within a range |
|
| of 0 to 2347 bytes. Normally, if there are no hiding |
|
| nodes problems, the values no need to be altered. |
|
Fragment Threshold | The value defines the maximum size of packets; any |
|
| packet size larger than the value will be fragmented. |
|
If you have decreased this value and experience higher packet error rates, you can increase the value again, but it will likely decrease the overall network performance. Select a value within the range of 256 to 2346 bytes. The default value is 2346.
23
