![](/images/new-backgrounds/1146757/146757125x1.webp)
Not forwarding | If enable this function, though the wireless clients | |
among wireless | are connecting to the same AP, still they cannot share | |
clients | information with each other. The system default is | |
| not forwarding data between stations. | |
|
| 4 |
Hide SSID | If the check box of“Hide SSID”is enabled, the AP |
|
| ||
| will not appear in the list of all the other wireless | |
| adapters. It means only the wireless adapters | |
| which has the same SSID can connect to the AP. In | |
| this way, it can avoid the AP being connected by | |
| unauthorized users. The default setting is disabled. | |
Allow BW40 MHz | When using “802.11B/G/N mix” mode, you may | |
| choose this function to allow BW40 MHz capability. | |
Default | Click this button and the AP will show the default | |
| value of this page. (Without Tx BURST, and Use | |
| Short Slot) | |
Apply | Click“Apply”to enable the settings you made on | |
| this page. | |
OK | Click“OK”button and the utility will save the | |
| settings and close the page. |
59
Chapter 4 Soft AP Mode