Others
About recovery
It is possible that the system cannot complete writing of a file normally when, for example, power is turned off for some reason during recording or editing.
If faulty management information is found when a disc is accessed, the following message may appear. (Repairing may take time depending on the error.)
CONTROL DATA ERROR HAS BEEN
DETECTED.
When connecting to AC adaptor or the remaining capacity of the battery is enough: [FINISHED.]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
THUMBNAIL DATA ERROR IS DETECTED.
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If the recovery fails, you will no longer be able to playback the data recorded before the power went off.
≥When data recorded on another device is recovered, it may not be possible to play back the data on this unit or the other device.
≥If the thumbnail information is recovered, displaying the thumbnails may become slower.
