Setup

To exit the menu screen

Press the MENU button.

MENU

≥The menu screen does not appear during recording or playing. You cannot start other operations while the menu screen appears.

Operating with remote control

The menu screen transition is the same as when the buttons on the main unit are used.

1Press the MENU button.

MENU

ENTER

2Select a menu item.

MENU

ENTER

≥Use the direction buttons (3, 4, 2, 1) and ENTER button in place of the cursor button on the main unit.

3Press the MENU button to exit the menu screen.

MENU

ENTER

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear. Move the cursor button up or down to select [YES], press the centre of the cursor button and then perform steps 2 and 3 below to set the date and time.

¬Rotate the mode dial to select .

1Press the MENU button, then select [BASIC] # [CLOCK SET] #

[YES] and press the cursor button.

2Move the cursor button left or right to select the item to be set. Then, move the cursor button up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2039, 2000, ...

≥The 24-hour system is used to display the time.

3Press the cursor button to enter

the selection.

≥The clock function starts at [00] seconds when the cursor button is pressed.

≥After pressing the MENU button to finish the setting, check the date and time display.

39

VQT1A15

Page 39
Image 39
Panasonic HDC-DX1 operating instructions Setting date and time