Before using

Using grip belt

Adjust the belt length so it fits your hand.

Adjust the belt length and the pad position.

2

31

1Flip the belt.

2Adjust the length.

3 Replace the belt.

Lens hood

Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C.

A

B

C

≥Attach the MC protector or the ND filter of the Filter Kit (VW-LF43NE; optional) in front of the lens hood. Do not attach the other accessories on the hood. (Except for the lens cap)

(Refer to the operating instructions for the Filter Kit.)

(Be careful about the following)

When 2 lens accessories, such as the ND filter, are attached and the W/T lever is pressed toward the W side, the 4 corners of an image will be darkened. (Vignetting)

Attaching the lens cap (Included in the Filter Kit (VW-LF43NE; optional))

Attach the lens cap to protect the surface of the lens.

≥When the MC protector or the ND filter of the Filter Kit (VW-LF43NE; optional) is attached to the front of the lens hood, use the lens cap included in the Filter Kit.

1Pass the end of the lens cap cord through the belt.

2Pass the lens cap through the loop.

3To attach or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb.

16

VQT1A15

Page 16
Image 16
Panasonic HDC-DX1 Using grip belt, Adjust the belt length and the pad position, Be careful about the following