
With other products
6Select the paper size setting on [PAPER SIZE].
[STANDARD]: | Size specific to the printer |
[4k5 INCH]: | L size |
[5k7 INCH]: | 2L size |
[4k6 INCH]: | Postcard size |
[A4]: | A4 size |
≥You cannot set paper sizes not supported on the printer.
7Select the layout setting on [PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[ | ]: | No frame print | |
[ |
| ]: | Frame print |
|
≥You cannot set page layouts not supported on the printer.
8Select [PRINT] # [YES] and press the cursor button to print the pictures.
≥Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed.
When you stop printing halfway
Move the cursor button down.
≥A confirmation message appears. If [YES] is selected, the number of prints set is cancelled and the screen returns to step 2. If [NO] is selected, all the settings are kept and the screen returns to step 3.
≥Avoid the following operations during printing. These operations disable proper printing.
–Disconnecting the USB cable
–Removing the SD card
–Switching the mode dial
–Turning off the power
≥Check the settings for the paper size, quality of print, etc. on the printer.
≥The edges of still pictures recorded on this unit with a 16:9 aspect ratio may be cut at printing. Check before printing. When using a printer with a trimming or borderless printing function, cancel this function before printing. (Refer to the operating instructions of the printer for details.)
≥You may not be able to print still pictures recorded with other products.
≥When the unit is connected directly to the printer, the DPOF settings cannot be used.
≥Connect the printer directly to this unit. Do not use a USB hub.
95