76
VQT1A15
Editing
4
(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be played back (the
thumbnails are displayed as [ ]) cannot be
deleted.
≥Protected scenes cannot be deleted.
≥In case of [ALL SCENES], the deletion may
take time if there are many scenes on the disc.
≥Do not turn off this unit while deleting.
≥When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
≥If you delete scenes recorded on other
products with this unit, all the data related to
the scenes may be deleted.
(RAM)
Scenes recorded on a disc can be protected so
that they are not deleted by mistake.
(Even if you protect some scenes on a disc,
formatting the disc will delete them.)
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the MENU button, then
select [PLAY SETUP] #
[SCENE PROTECT] # [YES] and
press the cursor button.
2Select the scene to be protected
and then press the centre of the
cursor button.
The [ ] indication appears and the scene is
protected.
≥Press the cursor button again to cancel the
setting.
≥2 or more scenes can be set in succession.
To complete the settings
Press the MENU button.

Protecting scenes

This is for preventing scenes from
being deleted by mistake.
VQT1A15ENG.book 76 ページ ２００７年１月２９日　月曜日　午後８時２４分