Panasonic HDC-DX1 1

With other products

86

VQT1A15

1Connect this unit and a TV with the HDMI cable (optional).

≥Use a HDMI cable (optional) A with the logo shown on above.

2Set the mode dial to to turn on the power.

3Select the input channel on the TV.

Example: Select the [HDMI] channel etc.

(The name of the channel may differ depending on the connected TV.)

4Start playback on this unit.

The image and audio are output on the TV.

ªIf the image or audio from this unit is not output on the TV

≥Check that the plugs are inserted as far as they go.

≥Check the connected terminal.

≥Check the input setting (input switch) and the audio input setting on the TV.

(For more information, please read the operating instructions for the TV.)

≥Check [HDMI RESOLUTION]. (l87)

1Connecting with a HDMI cable (optional)

What is HDMI?

HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI

compatible device, the image and audio can be output with a digital signal. If you connect this unit

and a HDMI compatible high definition TV and then playback the recorded high definition images

(l7), you can enjoy them in high resolution with high quality sound.

If you connect this unit to a Panasonic TV (VIERA) compatible with VIERA Link, linked

operations are possible. (l91)

HDMI IN

A

VQT1A15ENG.book 86 ページ２００７年１月２９日　月曜日　午後８時２４分

Contents

Main Information for Your Safety WARNING: CAUTION! Page Indemnity concerning recording content Carefully observe copyright laws Contents Before using Setup Recording Contents Playback Editing Disc and card management With other products With a computer Before using Features of the High Definition Video Camera A B High definition images What is the AVCHD? When connecting to a TV that does not have a HDMI terminal Other linked operations Watching High Definition images Using the remote control for the TV for playback Listening in 5.1 channel surround sound Accessories Optional accessories Parts identification and handling Page Page Page Page 1 2 3 1 2 Using the LCD monitor 1 2 Using the viewfinder Using the remote control Install a button-type battery 1 pull out the battery holder. 2 Remote control usable range Discs that can be used on this unit About DVD-R DL (dual layer on single side) Examples of discs that cannot be used on this unit Page Cards that you can use with this unit Disc and card handling How to hold a disc or card When inserting/removing a disc If there is dirt on the disc Handling precautions Setup Charging the battery 1 adaptor and the AC outlet. 2 Charging time and recordable time About batteries that you can use with this unit Charging time Recordable time About the remaining battery capacity indication Connecting to the AC outlet 1 adaptor and the AC outlet. 2 3 Selecting a mode (Turning the unit on/off) While pressing the lock release button, set the mode dial to , or . How to turn off the power Set the mode dial to OFF. How to turn on the power Inserting/removing a disc 1 2 3 Inserting disc 4 PUSH CLOSE on the cover of the disc compartment to close the cover. Identifying recording/playback sides of disc Inserting/removing an SD card 1 2 insert/remove the SD card into/ from the card slot. Concerning the SD card 1 2 1 2 Recording mode About the operation icons displayed in each mode Playback mode ( In motion picture playback) Playback mode ( In still picture playback) 1 2 3 Page 1 2 3 Setting date and time 1 2 Switching the language 1 cursor button. select [LANGUAGE] and press 2 Adjusting LCD monitor/ viewfinder 1 2 Page Recording Before recording Basic camera positioning About auto mode Turning the AGS function on/off Press the MENU button, then select [VIDEO] # [AGS] # [ON] or [OFF] Anti-Ground-Shooting (AGS) Recording motion pictures 1 2 the viewfinder. 3 Screen indications in the disc recording mode Recording modes/recordable time available for the motion picture Press the MENU button, then select [VIDEO] # [REC M ODE] # desired item Recording still pictures (JPEG) 1 2 the viewfinder. 3 About the screen indications only when the photo shot button is pressed halfway About the focus indication Concerning the focusing area ABCDE FG H Page Number of pixels and picture quality for still picture recording Picture quality and number of recordable pictures Picture quality Approximate Number of Recordable Pictures on an SD Card Various recording functions Move the zoom lever. VOL WT Zoom in/out function Press the MENU button, then select [BASIC] # [D.ZOOM] # desired item Press the MENU button, then select [VIDEO] # [ZOOM MIC] # [ON] and Digital zoom function About using the zoom microphone function Rotate the LCD monitor towards the lens side. Recording yourself Backlight compensation function This is for protecting a backlit subject from being darkened. 1 2 3 4 Fade in/fade out function Colour night view function This allows recording in dark locations. move the cursor button down to display the icon shown in the To cancel the soft skin mode move the cursor button down to display the icon shown in the Soft skin mode This makes skin colours appear softer for a more attractive appearance. Tele macro function This is for bringing only what you want to record into focus to take close-ups. 1 move the cursor button down to display the icon shown in the 2 select []. 3 1 move the cursor button down to display the icon shown in the 2 select []. 3 Image stabilizer function Press the MENU button, then select [BASIC] or [PLAY SETUP] [GUIDE LINES] desired item and Press the MENU button, then select [VIDEO] # [WIND CUT] # [ON] and Guide line function Wind noise reduction function 1 select [VIDEO] > [MIC LEVEL] > [SETrAGC] or [SET] and G 2 right to adjust the microphone input level. Zebra display This is for displaying the parts that are too bright Press the MENU button, then select [ADVANCED] # [COLOUR BARS] # To cancel the colour bar Manual recording functions 1 2 select [BASIC] # [SCENE MODE] desired item and press the cursor button. To cancel the scene mode fu nction 1 Press the MENU button, then select [ADVANCED] [MF ASSIST] # [ON] and press 2 3 to FOCUS position. 1 About the MF assist function 2 3 right to select the white balance mode. 1 white subject. 2 About the white balance sensor To set the white balance manually 1 2 right to select [ ] (aperture) or [ ] (shutter speed). 3 right to make the adjustment. Playback Playback of motion pictures on a disc 1 2 then left to select the [ ] (motion picture playback) tab. 1 2 1 2 1 select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and 2 3 back. Playback of still pictures on an SD card 1 2 then right to select the [ ] (still picture playback) tab. 3 4 5 operate. About still picture compatibility Editing Editing scenes 1 2 1 4 5 1 2 Protecting scenes Editing still pictures 1 4 2 1 5 1 2 Protecting still pictures 1 2 3 DPOF setting Disc and card management Formatting rotate the mode dial to and then select the [ ] (motion picture playback) tab. 1 select [SETUP] [FORMAT DISC] # [YES] and Finalizing a disc and then select the [ ] (motion picture playback) tab. 1 2 select [SETUP] [YES] and press the cursor 1 2 1 2 3 Un-finalizing a DVD-RW Creating a top menu Protecting a disc Auto Protect Operation rotate the mode dial to and then select the [ ] (motion picture playback) tab. 1 select [SETUP] [AUTO PROTECT] # [ON] and To release the disc protection Displaying disc information and then select the [ ] (motion picture playback) tab. With other products With a TV CDE depending on the terminal used for connection To display the on-screen information on the TV 1 About the settings when connecting with HDMI HDMI output resolution Press the MENU button, then select [SETUP] > [HDMI RESOLUTION] desired item and press the cursor 2Listening in 5.1 channel sound 1 If the image or audio from this unit is not output on the TV 1 If the image or audio from this unit is not output on the TV 4Connecting with the AV cable (supplied) VIDEO IN AUDIO IN Playback using VIERA Link (HDAVI Control) 1 VIERA Link with a HDMI cable (optional). 2 3 4 5 A To cancel VIERA Link (HDAVI Control) BC D 1) 2) Dubbing images onto a connected DVD recorder or video device 1 device. 2 on the power. With a printer (PictBridge) 1 2 3 4 6 [PAPER SIZE]. 7 [PAGE LAYOUT]. 8 With a computer Before using with a computer When using still pictures recorded on this unit with a computer. Operating environment for the card reader function (mass storage) What you can do with a computer Connection and recognition 1 computer. 2 images in this unit and then set the mode dial to to turn on the power. 1 2 3 About the computer display 1 2 3 To disconnect USB cable safely 1 2 3 Verifying the unit is correctly recognised by the computer If using a Macintosh 1 2 3 Others Menus and Indications Menu list Recording menus [BASIC] Playback menus (motion picture playback) [PLAY SETUP] Playback menus (still picture playback) [PLAY SETUP] [REC LAMP] [DISPLAY] [POWER SAVE] Menus related to [ADVANCED] and [SETUP] Recording indications Indications Playback indications PC connection indications Confirmatory indications Messages Page About recovery Functions that cannot be used simultaneously Frequently asked questions Troubleshooting Unit operations Page Page Page Page When connected to another device With a computer Cautions for use About this unit About the battery About the AC adaptor About the miniSD Card About the disc About the SD card LCD monitor/viewfinder Causes of condensation Explanation of terms Automatic white balance About condensation White balance Auto focus Specifications