Panasonic NV-VP33 Series Basic Connections, Audio/Video Output Sockets, S VIDEO terminal

Connections

When the unit is turned on after connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.

(NV-VP33GN only)

Basic Connections

The following connections are required to record the video cassette and play back the video cassette/discs through the TV.

≥Refer to the TV’s operating instructions.

≥Turn the TV off and disconnect its AC mains lead.

Note:

The included AC mains lead are for use with this unit only. Do not use them with other equipment.

			TV Set (Not supplied)
					Aerial
					(Not supplied)
To mains supply			Aerial Connector
AC IN ~	COMPONENT VIDEO			IN
	(PROGRESSIVE/INTERLACE)		R-AUDIO-L	VIDEO
	Y PB	PR		AV1 IN
DVD
OUT				OUT
COAXIAL DIGITAL				VHS/DVD
AUDIO OUT
(PCM/BITSTREAM)				OUT	RF
	R-AUDIO-L	VIDEO S-VIDEO	R-AUDIO-L
				VIDEO

Audio/Video Output Sockets

≥Set the RF output channel of the unit to “ss” (RF OFF) (l 11).

≥Connect Audio/Video cables directly to your TV. The video signals on DVDs and video tapes have copyright protection. The video may not be shown correctly if you connect through an A/V selector or other equipment.

AUDIO VIDEO

IN IN

L R

Audio/Video cable Television

(Supplied)

AC IN ~

DVD

OUT

COAXIAL DIGITAL

AUDIO OUT

(PCM/BITSTREAM)

COMPONENT VIDEO

(PROGRESSIVE/INTERLACE)

Y PB PR

R-AUDIO-L VIDEO S-VIDEO

R-AUDIO-L VIDEO

AV1 IN

VHS/DVD

R-AUDIO-L VIDEO OUT

For Better Video from DVD

Y PB PR
COMPONENT	Video cable (Not supplied)
VIDEO IN

Television

COMPONENT VIDEO terminal (progressive out)

These terminals can be used for either interlace or progressive output and provide a clearer picture than the S VIDEO terminal. Connection using these terminals outputs the colour difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colours.

≥The description of the component video input terminals depends on the TV or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same colour.

S-Video cable (Not supplied) S-VIDEO IN

Television

S VIDEO terminal

The S VIDEO terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance

(Y)signals (Actual results depend on the TV). ≥Connect to a different terminal group (e.g.

“VIDEO 2”) than that you used for the connection through this unit’s VHS/DVD OUT terminal. Picture from the VHS section will not appear when you use the same group input terminal connections because the S Video terminal input takes precedence.

≥These connections are for the DVD section only.				Audio cable
				(Not supplied)
Carry out the Basic Connections described above to view video from the
VHS section.				L	R
≥When making this connection, ensure that you connect the Audio cables
				AUDIO IN
(not supplied) to the corresponding audio input terminals on the TV.	R-AUDIO-L	VIDEO	S-VIDEO
≥You may need to change the video-input mode on the TV to view video				Television
from the VHS and DVD sections. Read your TV’s operating instructions
for details.

8

RQTV0057