Search Functions
Set the category
You can find what kind of programmes are recorded with the
Easy Programme Playback
character and the icon indications.
1) While the Jet Navigator list appears, press [NAVI] and then |
press [1] (cursor). |
You can find a
≥Set timer recording for the programme you wish to view.
2) | Press [342 1] to select the desired category. |
3) | Press [ENTER]. |
CATEGORY SETTING
MOVIE | SPORT | |||
MUSIC | CH I LD | |||
DRAMA | NEWS |
|
|
|
EDUCA | OTHER | |||
DOCUM | – – – – – | |||
|
|
|
|
|
| ENTER | |||
Press [PROG PLAY].
≥As soon as the timer- recorded programme is found, playback starts automatically.
PROG PLAY |
¬To cancel the Easy Programme Playback Press [∫STOP].
VHS Index Search System (VISS)
This unit automatically adds special index signals on the tape when recording starts. You can find the desired programme quickly with these signals.
During stop or playback,
Press [:] (backward) or [ 9] (forward).
≥Each press increases the number of skip.
¬To cancel the Index Search or to stop playback Press [∫STOP].
Notes:
≥Up to 20 index signals can be searched for from both directions. ≥When you press either one of the button too many times, you can
control the number of skips by pressing the opposite button. ≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the marks are too close together. Make recordings of at least 5 minutes.
¬Index signals are recorded in the following cases
≥When a recording is started by pressing [¥REC].
≥When [¥REC] on the remote control is pressed during recording. ≥When timer recording is activated.
Notes:
≥The unit memorizes the position at which timer recording is set to
the standby mode by pressing [ 
TIMER] as the start point of Easy Programme Playback.
≥When there is no programmed timer recording data, the message “CAN NOT FIND PROG PLAY DATA.” appears on the TV.
≥If you take out the cassette after a timer recording has finished, this function does not work.
20
RQTV0057
