Operating the TV
(1)
(2)
Numeric buttons
|
|
|
|
|
|
|
|
| TV Maker Setting | |
|
|
|
| (3) | You can operate the TVs of the manufacturers listed below with the | |||||
|
|
|
| remote control after setting it. | ||||||
|
| CH | VOLUME | ....................................................................................................................................................................................................................... | ||||||
|
|
|
|
|
| |||||
AV |
|
|
|
| ||||||
|
|
|
| [1] Refer to the chart below for the code of your TV. | ||||||
(4) | ||||||||||
|
|
|
| |||||||
OPERATION |
|
|
|
|
|
| ....................................................................................................................................................................................................................... | |||
|
|
|
|
|
|
|
|
| ||
SELECT |
|
|
|
| [2] Aim the remote control at the TV. | |||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| While press [Í] (1), use the numeric buttons to | |
|
|
|
|
|
|
|
|
| enter the | |
|
|
|
|
|
|
|
|
| Example: “1”; [0]l[1] | |
|
|
|
|
|
|
|
| ....................................................................................................................................................................................................................... | ||
|
|
|
|
|
|
|
| |||
|
|
|
| [3] Check whether the TV can be operated | ||||||
|
|
|
|
|
|
|
|
| properly. | |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
≥Test by turning on the TV and changing channels. Repeat the procedure until you find the code that allows correct operation.
≥When a manufacturer has multiple codes in the following chart, try entering other codes if the TV operations cannot be performed properly, and then select the optimal code.
Notes:
≥If you are using a Panasonic TV, this setting has already been made, you do not need to perform the above procedure. However, this remote control may not work on some Panasonic TVs.
≥Some TV models cannot be operated by this remote control (including all TVs
QUICKOSD 
![[1] Refer to the chart below for the code of your TV.](/images/new-backgrounds/160078/16007819xi3.webp){kind=small}
![While press [Í] (1), use the numeric buttons to](/images/new-backgrounds/160078/16007819xi4.webp){kind=small}
![[3] Check whether the TV can be operated](/images/new-backgrounds/160078/16007819xi6.webp){kind=small}
TV OPERATION
Turn on the TV.
(1)TV Power button (Í)
≥Switch the TV from on to standby mode or vice versa.
On some TVs with this button, it is only possible to turn it to standby mode (OFF). It is not possible to turn it on. In this case,
try to turn the TV on with the following button:
[JICH] (4)
(2)TV Input Mode Selector button (AV)
≥To select desired AV input on the TV.
(3)TV Volume Up/Down buttons (s N rVOLUME)
≥To adjust the volume of the TV.
(4)TV Channel Up/Down buttons (JICH)
≥To select the desired programme position (TV station) on the TV.
Brand | Code |
Panasonic/National | |
|
|
SONY | 05 |
|
|
TOSHIBA | 06 |
|
|
JVC | 07 |
|
|
HITACHI | 08 |
|
|
MITSUBISHI | 09, 10 |
|
|
SHARP | 11 |
|
|
PHILIPS, SAMSUNG | 12 |
|
|
NEC | 13 |
|
|
SANYO | 14 |
|
|
GOLDSTAR/LG | 15, 16 |
|
|
SAMSUNG | 17, 18 |
|
|
SANYO | 19 |
|
|
10
RQTV0057
