![](/images/new-backgrounds/1280759/28075951x1.webp)
Set-up Menus
OPERATION menu
| Item |
| Setting |
No. | Superimposed | No. | S u p e r i m p o s e d |
d i s p l a y | d i s p l a y | ||
108 FORMAT SEL 0000 | DVCPRO | ||
|
| 0001 | DV |
|
| 0002 | DVCAM |
Description of settings
This selects the format when an L cassette is used.
0:DVCPRO mode
1:DV mode
2:DVCAM mode
<Note>
The cassette tape is played back in one of the modes listed below depending on the tape type and settings used.
Type | FORMAT SEL setting | |||
DVCPRO | DV | DVCAM | ||
| ||||
S size cassette | DV | DV | DVCAM | |
M size cassette | DVCPRO | DVCPRO | DVCPRO | |
L size cassette | DVCPRO | DV | DVCAM |
Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM tapes are to be used in the playback mode, it is recommended that playback be limited to as short a period of time as possible.
109 REC INHIBIT | 0000 | OFF | This selects whether to inhibit recording on the VTR. |
| 0001 | ON | 0: Recording is not inhibited. |
|
|
| 1: Recording is inhibited. |
The underlined number and item are the factory settings.
INTERFACE menu
Item
No. | S u p e r i m p o s e d | No. |
display | ||
200 | BAUD RATE | 0000 |
|
| 0001 |
|
| 0002 |
|
| 0003 |
|
| 0004 |
201DATA LENGTH 0000 0001
202 | STOP BIT | 0000 |
|
| 0001 |
203 | PARITY | 0000 |
|
| 0001 |
|
| 0002 |
204 ACK RETURN 0000
0001
Setting | Description of settings |
S u p e r i m p o s e d | |
d i s p l a y |
|
1200 This sets the | |
2400 |
|
4800 |
|
9600 |
|
19200 |
|
8BIT | This sets the |
7BIT |
|
1BIT | This sets the |
2BIT |
|
NONE | This sets whether the |
ODD | and, if so, whether with even or odd parity. |
EVEN | 0: The parity bit is not used. |
| 1: The parity bit is used with odd parity. |
| 2: The parity bit is used with even parity. |
OFF | This sets the |
ON | 0: The ACK code is not returned. |
1: The ACK code is returned.
The underlined number and item are the factory settings.
<Note>
After the settings of items No.200 through No.203 have been changed, the new settings will not take effect until the power is switched on. This means that the power must be turned off and back on again after these settings are changed.
26