Panasonic AJ-D230HP operating instructions Set-up Menus, Basic menu, Setting

Set-up Menus

BASIC menu

Item

No.	S u p e r i m p o s e d	No.
	d i s p l a y

000DISPLAY SEL 0000 0001 0002

001CHARA H-POS 0000 0001

0003

0007

002CHARA V-POS 0000

0001

0003

0007

003 CHARA TYPE 0000

0001

005MENU INHIBIT 0000 0001

Setting

S u p e r i m p o s e dDescription of settings

d i s p l a y

OFF This sets what is to be displayed for the superimpose TIME signals output from the MONITOR OUT connector.

T, STA 0: No display

1:Only the time is displayed.

2:The time and operation mode are displayed.

0This sets the horizontal position of the superimposed

1characters (8 settings to choose from).

:

3

:

7

0	This sets the vertical position of the superimposed
1 characters (8 settings to choose from).
:
3
:
7
WHITE	This selects the type of characters for the
W/OUT	superimposed display and menu display.
	0: White characters appear on a black back ground.
	1: White characters with black borders appear.
OFF	This selects whether or not the menu settings are to be
ON	fixed.
	0: The settings are not fixed.
	1: The settings are fixed (and cannot be changed).

The underlined number and item are the factory settings.

.<Notes>

While setting “CHARA H-POS”, “CHARA V-POS”, and “CHARA TYPE”, the counter display can be viewed by holding down the MODE button, allowing you to check the settings. You can also use the

.DATA+ and DATA– buttons while holding down the MODE button to adjust the values while you are viewing them.

To set ON or OFF for the “MENU INHIBIT” item, first press the DATA+ or DATA– button while holding down the MODE button, and then select the setting.

Continuously after performing the settings, press the SET button (REC button) to exit the menu. The MENU INHIBIT setting takes effect starting with the next menu mode.

24