Panasonic AJ-D230HP AC in connector, Signal GND terminal, Fan motor, Handle Video in connector

Controls and Their Functions

Connector section

AC IN connector

Use the power cord supplied to connect this connector to the power outlet.

SIGNAL GND terminal

This is connected to the signal ground terminal on the unit connected in order to reduce the noise. It is not a safety ground.

Fan motor

This is for cooling the unit.

Handle

S-VIDEO IN connector

This is the input connector for the S-VIDEO video signals.

VIDEO IN connector

This is the input connector for the analog video signals.

SYNC IN connector

This is connected to the composite sync signals of a reference sync signal generator if synchronization with an external reference sync signal is to be obtained during playback.

AUDIO IN connector

This is the input connector for the analog audio signals.

S-VIDEO OUT connector

This is the output connector for the S-VIDEO video signals.

VIDEO OUT connector

This is the output connector for the analog video signals.

MONITOR OUT connector

This is the output connector for the video monitor signals.

Superimposed video signals can be output from it.

AUDIO OUT connector

This is the output connector for the analog audio signals.

RS-232C connector

Connecting the optional RS-232C cable to this connector enables many kinds of computerized operations to be performed for the unit.

RS-232C connector

10