Set-up Menus
MEMORY MODE menu
Item
No. | S u p e r i m p o s e d | No. |
d i s p l a y |
300 MEMORY | 0000 | |
0001 | ||
MODE | ||
0002 | ||
| ||
| 0003 |
Setting
S u p e r i m p o s e d d i s p l a y
OFF
MEM STOP REPEAT 1 CONTINUE
Description of settings
This sets the memory operation.
0:No memory operation.
1:The tape stops near the BEGIN point when it is fast forwarded or rewound.
2:When the tape reaches the end, it is rewound to the BEGIN point where it stops.
3:When the tape reaches the end, it is rewound to the BEGIN point where it is played, and this process is repeated.
301 BGN/END PRESET | This sets the BEGIN point and END point. |
The underlined number and item are the factory settings.
TAPE PROTECT menu
Item
No. | S u p e r i m p o s e d | No. |
d i s p l a y | ||
400 | STILL TIMER | 0000 |
|
| 0001 |
|
| 0002 |
0003
0004
0005
401SRC PROTECT 0000 0001
402DRUM STDBY 0 0 0 0001
403 STOP | 0000 |
PROTECT | 0001 |
Setting | Description of settings |
S u p e r i m p o s e d | |
d i s p l a y | This selects the time taken until the unit is set to the |
0.5S | |
5S | tape protection mode when it has been left standing in |
10S | the stop, play pause or still mode. |
30S (Units: S = seconds, MIN = minutes) | |
1MIN | The setting for the time taken until the unit is set to |
2MIN | the tape protection mode when it has been left |
| standing in the REC PAUSE mode is fixed at 2 |
| minutes. |
STEP This sets the tape protection operation which is HALF performed when the unit has been left standing in the
pause mode.
0:Step (step FWD in the still or pause mode; step REV in the REC pause mode)
1:Half loading (standby OFF)
OFF | This sets whether or not the drum is to be stopped in |
ON | the STANDBY OFF mode. |
| 0: The drum rotates at all times. |
| 1: The drum is stopped in the STANDBY OFF mode. |
STEP | This sets the tape protection operation to be performed |
HALF | when the unit is left standing in the STOP mode. |
| 0: Step |
| 1: Half loading |
The underlined number and item are the factory settings.
<Note>
When using a consumer DV cassette tape, tape protection mode is set after 10 seconds, even if STILL TIMER is set to "30S", "1MIN" or "2MIN".
27
