System Settings

Page 2 of 3

To select a new value as a setting:

1.Press until >SETUP appears, and then press .

2.Press or until the desired menu appears, and then press

3.Press , , until the desired menu or menu item appears, and then press

If the selection is a menu, the menu is opened and the first system setting in the menu appears.

If the selection is a menu item, the default menu setting for the menu item appears. (The current user default menu setting has an asterisk (*) beside it.)

Each menu item has a list of values for the menu item. A value can be:

A phrase or word to describe a setting

A numerical value that can be changed

An On or Off setting

4.Press or to scroll until the desired value appears.

5.Press Back to return to the previous menu.

To continue setting other items, select the desired menu. To quit setting new values, press Cancel.

Driver settings may override changes previously made and may require you to change the operator panel defaults.

NOTE: To adjust the density to make the scanned copy lighter or darker than the original.

Using the Dell Printer Configuration Web Tool to Change System Settings

If your multifunction printer is connected to the network, you can change the operator panel settings from your Web browser. If you are a network administrator, you can clone the system settings of one printer to one or all printers on the network.

Type your network printer IP address in your Web browser. Choose System Settings from the topics list, and then select the system settings you want to change.

To copy your system settings to another printer on the network, choose Copy Printer Settings from the topics list, and then type the other printer's IP address.

If you do not know your printer IP address, see the system settings page. To print a system settings page:

1.Press until >SETUP appears, and then press .