Dell Printer Configuration Web Tool

Page 16 of 40

Panel Select Tone

Displays the selected tone for the panel.

 

 

Panel Alert Tone

Displays the alert tone for the panel.

 

 

Machine Ready Tone

Displays the tone when the machine becomes ready.

 

 

Copy Job Tone

Displays the tone when copying starts.

 

 

Non-Copy Job Tone

Displays the tone when copying is complete.

 

 

Fault Tone

Displays the tone when an error occurs.

 

 

Alert Tone

Specifies whether the multifunction printer sounds an alarm when an error occurs.

 

 

Out of Paper Tone

Displays the tone when the paper runs out.

 

 

Low Toner Tone

Displays the tone when the toner is low.

 

 

Auto Clear Alert Tone

Displays the tone when the jam is cleared.

 

 

Base Tone

Displays the base tone.

 

 

All Tones

Displays all types of tones.

 

 

Time-Out

Specifies the amount of time the multifunction printer waits to receive additional bytes of data from the computer. When this timeout

 

expires, the print job is canceled.

 

 

Panel Language

Determines the language of the text on the operator panel screen.

 

 

Auto Log Print

Specifies whether the multifunction printer outputs logs automatically.

 

 

Print ID

Specifies a location where the user ID is printed.

 

 

Print Text

Specifies whether the multifunction printer outputs PDL data, which is not supported by the multifunction printer, as text when the

 

multifunction printer receives it.

 

 

Banner Sheet Insert

Specifies the position of banner sheet.

Position

 

 

 

Banner Sheet Specify

Specifies the tray in which the banner sheet is loaded.

Tray

 

 

 

RAM Disk

Specifies whether to allocate memory to the RAM disk file system for the Secure Print and Store Print features.

 

This item is only available when the 256 MB, or higher, optional memory card is installed.

 

 

Substitute Tray

Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size

 

settings for the current job.

 

 

mm/inch

Specifies the measurement unit on the operator panel screen as either mm or inches.

 

 

Fax Activity

Displays the status for printing the fax activity.

 

 

Fax Transmit

Displays the status for printing the fax transmission.

 

 

Fax Broadcast

Displays the status for printing the fax broadcast.

 

 

Protocol Monitor

Displays the status for printing the protocol monitor.

 

 

Parallel Settings

Purpose:

To configure the parallel interface.

Values:

ECP

Specifies the ECP communication mode of the parallel interface.

 

 

Adobe Protocol

Specifies PostScript communication protocol for each interface.

 

 

Network Settings

Purpose:

To Specify the PostScript communication protocol for this multifunction printer.

Values:

Adobe Protocol Specifies PostScript communication protocol for each interface.

USB Settings

Purpose:

To change printer settings affecting a USB (Universal Serial Bus) port.

Values:

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012

Page 22
Image 22
Dell 3115CN manual Ecp