Dell 3115CN manual Auto Reset, Alert Tone

Understanding Menus Page 45 of 61

5min*

Mode2 1-6 min

6 min*

Enter 5 to put the multifunction printer in power saver mode five minutes after it finishes a job. This uses much less energy, but requires more warm-up time for the multifunction printer. Enter 5 if your multifunction printer shares an electrical circuit with room lighting and you notice lights flickering.

Select a high value if your multifunction printer is in constant use. Under most circumstances, this keeps the multifunction printer ready to operate with minimum warm-up time. Select a value between 5 and 60 minutes for power save mode if you want a balance between energy consumption and a shorter warm-up period.

The multifunction printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can also return the multifunction printer to the standby mode by pressing any button on the operator panel.

Auto Reset

Purpose:

To automatically reset the settings for COPY, SCAN, or FAX to the default and return to the standby mode after you do not specify any settings for the specified time.

Values:

45sec

1min

2min

3min

4min

Alert Tone

Purpose:

To sound an alert when an event associated each function occurs.

Values:

Panel Select Tone

Soft

Normal

Sounds an alert when you press a button on the operator panel.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012