a. Transmission image quality
Purpose:
To set the output quality.
Values:
b. Transmission Report
Purpose:
To specify the communication result for the fax transmission.
Values:
c. Record of senders
Prints the sender record at the head of the fax. Select Off to turn this feature off. Select On to turn this feature on.
5. Click OK to close the Printing Preferences dialog box.
6. Click Print. The Set/Check Fax Transmission: dialog box opens.
NOTE:The settings don e here are only applied to a single fax job.
Standard For documents with normal sized characters.
High Quality* For documents containing small characters or thin lines or documents printed using a dot-matrix printer.
Super-high image
quality
For documents containing extremely fine detail. The super fine mode is enabled only if the remote printer also supports Super
Fine resolution. See the notes below.
NOTE:Faxes printed in the Super-high image quality by Direct Fax driver transmits at the highest resolution supported by the receiving device.
Output regularly Always prints the report for the fax transmission.
Output for non-transmission* Prints the report when a communication error is detected.
Do not output Does not print the report.
Page
12
of
20
Faxing
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...