does not provide warranty coverage for problems
caused by using accessories, parts, or components not
supplied by Dell.
Removing the Used Transfer Belt Unit
1. Ensure that the multifunction printer is turned off.
2. Push the button (right side) and open the front cover.
3. Pull up on the belt release levers and rotate the transfer belt unit up as shown in the illustration.
NOTE: Remove any print jobs from the output tray, and close the multipurpose feeder cover before
opening the front cover.
Page
18
of
24
Maintaining Your Multifunction Printer
2/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...