5.
Remove the orange protective cover of
the installed print cartridge and discard.
6. Close the front cover.
Replacing the Fuser Unit
CAUTION: To prevent electric shock, always turn off the multifunction printer and disconnect
the power cable from the grounded outlet before performing maintenance.
CAUTION: Before performing any of the following procedures, read and follow the safety
instructions in your Owner's Manual or Product Information Guide.
NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within
five minutes. If the front cover remains open for more than five minutes, print quality may deteriorate.
NOTE: Remove any print jobs from the output tray, and close the multipurpose feeder before opening
Page
6
of
24
Maintaining Your Multifunction Printer
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...