*Only compatible with Support Pack 1.1 or later.
1. Ensure that the multifunction printer is turned off and unplug all cables including the power cord from the rear of the
multifunction printer.
2. Turn the screw on the control board cover in counter-clockwise direction and open the cover.
3. With the connector of the multi-protocol card aligned over the mating connector on the control board, make connections together
by pressing on the back of the MPC card nearest the connecter pins.
4. Press the printed circles with your fingers to secure the multi-protocol card to the connector.
IPv6 Windows Vista
NOTE:Avoid pressing down on the multi-protocol card's connector.
NOTE:Ensure that the multi-protocol card is firmly fixed in the connector and cannot be moved easily.
Page
15
of
48
Installing Optional Modules
2/
29/
2012
...