About Your Multifunction Printer | Page 3 of 3 |
3
4
Document Feeder Tray
Document Feeder Glass
Operator Panel
For details on the operator panel, see "Operator Panel"
Power Saver Mode2
The scan lamp under the document feeder glass automatically turns off when it is not in actual use during a preset period to reduce power consumption and extend the lamp life. The lamp automatically turns on and the
You can set the length of time for which the scan lamp waits after a scan job is completed before it switches to the Power Saver Mode2.
1.Press 
until >SETUP appears, and then press 
.
2.Press 
until >Admin Menu appears, and then press 
.
3.Press 
until System Settings appears, and then press 
.
4.Press 
until >Power Saver Mode2 appears, and then press 
5.Press 
to select On, and then press 
6.Press 
until >Power Saver Timer appears, and then press 
7.Press 
to select the desired time, and then press 
.
8.To return to the standby mode, press Cancel.
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012
