b. Right-click Wireless Network Connection and selectProperties.
c. Select theWireless Network tab.
d. Ensure that the check box for Use Windows to configure my wireless network settings is checked.
e. Click Advanced.
f. Do either of the following:
When wireless ad-hoc mode is set to the multifunction printer:
zSelect Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the multifunction printer:
zSelect Access point (Infrastructure) networks only and close the Advanced dialog box.
g. Click Add to display Wireless network properties.
h. Enter the setting that you send to the multifunction printer and click OK.
i. Click Move up to move the setting to the top of the list.
j. Click OK to close the Property dialog box.
For Windows Vista:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the setting you send to the multifunction from the network items listed in Connect to a network.
f. Select Connect Anyway in the warning dialog box indication indicating you are entering an unsecured area.
g. Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a network.
d. Select the setting you send to the printer from the network items listed in Connect to a network.
e. Select Connect Anyway in the warning dialog box indication indicating you are entering an unsecured area.
f. Click Close in the dialog box after confirming the connection is a success.
11. On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the multifunction printer to which the
wireless setting is set, and then clickInstall.
12. If you select the I am setting up this printer on server check box on the Select Printer screen and also select the
PostScript Driver check box on the Enter Printer Settings screen, the Adobe Systems Inc. License Agreement screen
appears. Select the I accept the terms of the license agreement option button, and then click Install.
NOTE:If your system has any of the following operating systems:
- Windows XP x64
- Windows Server®2003 x64
- Windows Server®2008 x64
- Windows Vista x64
- Windows Vista x86
,skip step 12 and go to step 13.
Page
29
of
48
Installing Optional Modules
2/
29/
2012
...