Copying | Page 6 of 14 |
NOTE: You can set the value in a percent for Custom.
5. Press Start to begin copying.
Original Type
The Original Type setting is used to improve the image quality by selecting the document type for the current copy job.
To select the image quality:
1.Load the document to be copied on the document feeder glass, and close the cover.
2.Press 
until >COPY appears, and then press 
.
3.Press 
until Original Type appears.
4.Press 
to select the desired settings, and then press 
Text&Photo* | Uses for documents with both text and photo/gray tones. |
|
|
Photo | Uses for documents with photo or gray tones. |
|
|
Best | Uses for documents with fine text of high resolution. |
|
|
Text | Uses for documents with text. |
|
|
5. Press Start to begin copying.
Lighter/Darker
Adjust the contrast to make the copy lighter or darker than the original.
To adjust the contrast:
1.Load the document to be copied on the document feeder glass, and close the cover.
2.Press 
until >COPY appears, and then press 
.
3.Press 
until Lighter/Darker appears.
4.Press 
to select the desired settings, and then press 
Normal* Works well with standard typed or printed documents.
Darker1 Works well with light print or faint pencil markings.
Darker2
Darker3
Lighter3 Works well with dark print.
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012
