Dell 3115CN manual Printing on Letterhead, Selecting Pre-punched Paper

Models: 3115CN

1 347
Download 347 pages 702 b
Page 115
Image 115

Print Media Guidelines

Page 4 of 9

￿Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 225°C (437°F) without melting or releasing hazardous emissions.

￿Use inks that are not affected by the resin in toner or the silicone in the fuser unit. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.

Printing on Letterhead

Check with the manufacturer or vendor to determine whether the pre-printed letterhead you have selected is acceptable for laser printers.

Page orientation is important when printing on letterhead. Use the following table for help when loading letterhead in the print media sources.

Print media source

Print side

Page orientation

 

 

 

Standard 250-sheet tray

 

Letterhead enters the multifunction

Optional 550-sheet paper

 

printer last

 

 

feeder

 

 

Multipurpose feeder

Face down

Letterhead enters the multifunction printer first

Selecting Pre-punched Paper

Pre-punched paper brands can differ in the number and placement of holes and in manufacturing techniques. However, it may not be possible to print on the paper to depending on the placement of holes on the paper.

To select and use pre-punched paper:

￿Test paper from several manufacturers before ordering and using large quantities of pre-punched paper.

￿Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled paper can cause jams when multiple sheets feed through the multifunction printer. This

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012

Page 115
Image 115
Dell 3115CN manual Printing on Letterhead, Selecting Pre-punched Paper