Dell 3115CN manual 10BASE-T

Dell Printer Configuration Web Tool Page 28 of 40

Purpose:

To configure the printer's basic information.

Values:

System	Printer Name		Specifies the name of the multifunction printer up to 31 alphanumeric characters.
Settings
	Location		Specifies the location of the multifunction printer up to 63 alphanumeric characters.
	Contact Person		Specifies the contact name, number, and other information of the printer administrator and service center up to 63
			alphanumeric characters.
	Administrator E-Mail		Specifies the contact address of the printer administrator and service center up to 63 alphanumeric characters.
	Address
	Asset Tag Number		Enter the asset tag number for the multifunction printer.
EWS Settings	Auto Refresh	On	Refreshes the contents of the status display pages automatically.
		Off	Does not refresh the status display pages automatically.
	Auto Refresh Interval		Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600 seconds.

NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page.

Port Settings

Purpose:

To specify whether to enable or disable printing ports and management protocol features.

Values:

Ethernet*	1	Ethernet		Auto	Detects Ethernet transmission rate and the duplex settings automatically.
		Settings
				10BASE-T	Selects 10Base-T Half-Duplex as the default value.
				Half-Duplex
				10BASE-T	Selects 10Base-T Full-Duplex as the default value.
				Full-Duplex
				100BASE-TX Half-	Selects 100Base-T Half-Duplex as the default value.
				Duplex
				100BASE-TX Full-	Selects 100Base-T Full-Duplex as the default value.
				Duplex
		Current Ethernet Settings			Displays the current settings of Ethernet.
		MAC Address			Displays the printer's MAC address.
Port		LPD			Select the check box to enable the LPD.
Status
		Port9100			Select the check box to enable the Port9100.
		2			Select the check box to enable the IPP port.
		IPP*
		WSD			Select the check box to enable the WSD port.
		FTP			Select the check box to enable the FTP port.
		2			Select the check box to enable the SMB.
		SMB*			You can also configure the transport protocol to be used. TCP/IP and NetBEUI can be selected simultaneously as
					the transport protocol.
		2			Select the check box to enable the NetWare port. You can also configure the transport protocol to be used.
		NetWare*			IPX/SPX and TCP/IP can be selected simultaneously as the transport protocol.
		AppleTalk*	2		Select the check box to enable the AppleTalk port.
				2	Select the check box to enable the Bonjour(mDNS) feature.
		Bonjour (mDNS)*
		E-Mail Alert			Select the check box to enable the E-Mail Alert feature.
		SNMP Agent			Select the check box to enable the SNMP (Simple Network Management Protocol).
					You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the
					transport protocol.
					IPX is only available when the multi-protocol card is installed.

*1 The Ethernet settings are not displayed when the optional wireless printer adapter is installed.

*2 An optional multi-protocol card is required to display the item.

NOTE: The settings in the Port Settings page will be valid only when the multifunction printer is rebooted. When you change or configure the settings, click the Restart printer to apply new settings button to apply new settings.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012