Dell 3115CN manual Ncp

Dell Printer Configuration Web Tool Page 31 of 40

	Bindery:	Selects this option when using in Bindery: PServer Mode.
	PServer Mode
Tree Name*1		Specifies the tree name up to 32 alphanumeric characters. Configure this item only when Directory: PServer Mode is
		selected.
Context Name		Specifies the context name of the Print Server Object up to 255 alphanumeric characters. Configure this item only when
		Directory: PServer Mode or Directory: RPrinter Mode is selected.
File Server Name*1		Specifies the file server name up to 47 alphanumeric characters. Configure this item only when Bindery: PServer
		Mode is selected.
Polling Interval		Sets the time interval from when print data enters the print queue until printing starts. The setting range is from 1 to
		1000 seconds. The original setting remains valid if no input is made. Configure this item only when Bindery: PServer
		Mode or Directory: PServer Mode is selected.
NCP	On	Uses NCP packet burst.
Packet
Burst	Off	Does not use NCP packet burst.
Password		Sets the print server password up to 32 alphanumeric characters. Configure this item only when Binary: PServer
		Mode or Directory: PServer Mode is selected.
Confirm Password		Enter the password again.
Status Information		Displays the status of NetWare.

SLP

Active Discovery

Select the check box to enable Active Discovery.

*1 The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (¥), back slash (\), double quotation ("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (), slash (/), and space ( ).

NOTE: The settings in the NetWare page will be valid only when NetWare or the multifunction printer is rebooted. Click the Restart printer to apply new settings button to apply new settings.

NOTE: An optional multi-protocol card is required to display the NetWare page.

SMB

Purpose:

To configure detailed settings for SMB.

Values:

Host Name		Specifies the host name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Workgroup		Specifies the workgroup name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Administrator Name		Specifies the administrator name up to 20 alphanumeric characters. The original setting will remain valid if no input is made. The
		default name is admin.
Administrator Password		Specifies the administrator password up to 14 alphanumeric characters. The original setting will remain valid if no input is made. The
		default password is password.
Confirm Administrator		Allows you to confirm the configured administrator password by re-entering the same password.
Password
Maximum Sessions		Displays the maximum sessions.
Unicode Support	On	Notifies the host name and workgroup name in Unicode characters.
	Off	Does not notify the host name and workgroup name in Unicode characters.
Auto Master Mode	On	Enables the Auto Master Mode.
	Off	Disables the Auto Master Mode.
Encrypt Password	On	Encrypts the password.
	Off	Does not encrypt the password.
Job Time-Out		Sets the timeout period from 60 to 3600 seconds.
Connection Time-Out		Sets the connection timeout period from 60 to 3600 seconds.

NOTE: The settings in the SMB page will be valid only when the multifunction printer is rebooted. Click the Restart printer to apply new settings button to apply new settings.

NOTE: An optional multi-protocol card is required to display the SMB page.

AppleTalk

Purpose:

To configure the detailed settings for AppleTalk.

Values:

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012